Saturday, 26 July 2014

How to: Watermark Your Images

So, if you read our Facebook page not long after the group was set up I posted a brief bit on protection our intellectual property from those out there on the internet that want to make use of our creativeness to make themselves money.

One of the items that I spoke about was watermarking, probably the most important bit of post processing (commonly called 'post' in jargon speak) that you can do if posting your images onto something like Facebook.  I subsequently promised a how to article on here, so here we go!

1) Paint

You don't have to be a whizz kid with expensive or complex photo editing suites to watermark your photos.  One of the simplest things you can do is us MS Paint or Paint.Net.  Simply import your image as a .jpg file (pretty much every camera will save its images as this unless you're shooting in RAW, which I will discuss in my intro to post article on here soon), choose the text tool, which looks like a capital A.  Click where you want your text to be (in Paint.Net I think you have to click and drag to draw a text box but it's so long since I used it I can't remember) then type your text!  It's best to use a colour that won't clash too much with the image but still be visible and if it's available you can improve things by setting the text to be transparent.



2. Doing it on your phone

As a bit of a self confessed Apple fan I have an iPhone, but I checked last night and the app that I use is also available on Android phones.  It's called PhotoMarkr and is free to download and fairly easy to use.

When you open the app for the first time you are presented with the screen on the left; simply type your watermark text into the text box, choose a colour and font then press done.
You then get a blank screen with four buttons at the bottom like the image on the right, the left hand button allows you to choose a photo from your library, the one that looks like a camera allows you take take a photo through the app to use.  The third button then allows you to place your watermark.  Once you've chosen or taken a photo press the copy right button and you will get a pop up telling you how to place your watermark.  Follow the instructions and you get something like this:


The third button allows you to save the image to your library and the circle with a cross in lets you remove the watermark and start again.  When placing a watermark you can also choose how transparent to make it.  In all screens the cogwheel symbol takes you back to the 1st screen.

3. Photoshop Elements

I have an old version of photoshop elements from my OU course, it's version 8 but the way it works is hopefully still the same.  Photoshop works using layers (don't worry I explain what they are in a tutorial!) and you can use a text layer in the same way as you do in MS Paint with one extra step.
First off press the button that looks like a capital T, this will allow you to create a text layer.  Click where you want your text to be, choose the font, size and colour from the top of the screen and type away.


Once you have you have a watermark you're happy with you need to flatten the image before you can save it.  To do this choose 'Layer' from the toolbar at the top of the window and then choose 'Flatten Image'


What this does is squash all your layers you have been working with down into one layer, the 'Background' layer allowing you to save and export the image as normal.


4. Aperture

This is for you other Mac users out there.  iPhoto does not currently support watermarking unless you use a third party app.  Because I use Aperture anyway I will not look at these apps but I will show you how to do it in Aperture.

First we need to make our watermark.  I used InkistLite for this, a free paint type program which allows you to use pictures with a transparent background.  To do this use the erase tool (red ring) with a suitably large brush to brush away all of the white background.  Then using the pencil tool scrawl your watermark in a colour of your choosing.  Unfortunately this way of watermarking in Aperture will only allow you to use one colour, that is the colour you pick now, although you can make several different watermarks with different colours and use those.  Finally save this image somewhere as a .jpg.



Once you have your watermark the way to apply it in Aperture is by exporting your picture.  This means you want to have to have finished all your other post before applying it!  Go to 'File' and choose 'Export...Versions...'


This will bring up the following window, in here (I'm assuming you're starting from scratch unlike me) choose 'Edit' in the 'Export Preset' drop down list.


I've already created my export preset for my blog but you can use the '+' button to copy one of the pre-existing JPEG export formats, give it a new name, tick the 'Show Watermark' tick box and then choose the 'Choose Image...' button.  Find your watermark and select it.  You can then choose where to put the watermark and make it more or less opaque.  Choose 'OK' to return to the previous screen where you can choose you other export settings.


Once happy with the export settings hit the 'Export Versions' button and you should find you get something like this:

If however you get something like this then it means your contraction of the watermark image went wrong and you still have the background visible so you'll have to go back to the beginning and start the process again.


5. GIMP

Last but not least is my favourite none Aperture editor the GIMP (GNU Image Manipulation Program) a free to download version of full up Photoshop currently on version 2.8.  This runs on Windows, Mac and Linux (although installation can be a challenge there are plenty of websites to help you with it).  This GIMP is massively powerful and like Photoshop works in layers.  It's dead easy to create watermarks and you can also do some pretty advanced ones with noise filters and the like to make it even harder to remove them and with brushes to reduce the steps to create watermarks (I'm not going to cover this here though).

First off open you image and select the text tool from the tool bar it looks like an A:



















Then click where you want your text, choose the colour, font and size (GIMP defaults to pixels for text size so make sure to choose points (pt) from the drop down on the right>  Type your water mark.

In the layers window on the right hand side (default position) you will see your new text layer, normally with the text you typed into it as its name.  As with Photoshop we need to flatten the image to be able to save it.  Right click on the new text layer and you will get a big long list of commands.  At the bottom is 'Flatten Image'.  Click that and then the GIMP will flatten your image to one layer like in Photoshop.







This should leave you with something like this, ready to be saved and exported etc:


Hopefully this has shown you how to watermark your images, in a package which you have access to,   to protect your IP and stop people stealing credit for your hard work.  Keep your photos safe out there and happy snapping!

Sunday, 20 July 2014

Beginner: Exposure is not Dirty!

In photography exposure is one of the key things that makes or breaks a photo.  It is also something that can radically divide the community; some people like bright photos but some say they are over exposed, some like dark photos but others say that they are under exposed; whatever you think however exposure is important and affects every photographer regardless of the type of camera you use.

Getting it wrong

There are two things that can go wrong with exposure.  You can get something over exposed or you can get something under exposed.  But what does this mean?  I'm may get a little techy but, as normal, I will highlight the key points in italics.

When an image is overexposed all the colours in it tend towards white.  A truly over exposed image is completely white and looks pretty rubbish!  What is more when an image, or part of an image, is over exposed and turns white you cannot recover the original colours.

When an image is underexposed it tends towards being all black.  A completely underexposed images will be entirely black and you may as well not have taken the lens cap off!  The good news is that under certain conditions under exposure can be recovered from.

Now above I hinted at something, whilst mainly talking about whole images I threw in a seemingly careless 'part of an image'.  This is the key to the balance when we talk about exposure, under and over exposure of an image can relate to parts or all of the image.

Lets look at some examples:
Exposure from under exposed to over exposed.
On the far left the whole photo is under exposed.  You can hardly make out any detail in either sky or buildings.  One in from the left the sky is better, you can see some detail in it but the building is still very under exposed.  In the centre is about as good as you can get with out doing any post processing (post in jargon speak).  Following on from that the building is nicely exposed but the sky is completely over exposed or 'blown' in jargon (blown means the picture or part of the picture is recorded by the camera as pure white).  The final picture is completely over exposed with almost all detail lost.

So this shows how the exposure of an image can ruin it completely, whether through part of the image being incorrectly exposed or the whole image is incorrectly exposed.  But what is exposure and how do we control it?

Am I exposed?

Exposure is all about how much light gets into the camera and how sensitive our camera (or film) is to the light it receives.  My first tutorial gave you an indication of the three building blocks of exposure: the ISO, the f-number and the shutter speed.  Go and read it now for revision or if you missed it.

The key facts that should be drawn from that first tutorial is that exposure is a balance of all three numbers and this is where we start to get into the meat of the matter!

Time for another example:
Balancing the numbers.
As I discussed in the first tutorial there are three ways of effectively changing the light coming seen by the camera.  In 1st row above I have kept the shutter speed and aperture (f-number) constant but changed the ISO, from 800 on the left to 400 in the middle and 200 on the right, making the camera less sensitive to the light it sees.  Each change of ISO has halved the sensitivity of the camera and the picture goes from being what my camera thinks is 1 stop over exposed to correctly exposed to 1 stop under exposed.  In the 2nd row I have changed the shutter speed but kept the ISO and aperture constant changing from 1/100 to 1/200 to 1/400; here each change halves the amount of light coming into the camera and changes from being 1 stop over exposed to correctly exposed to 1 stop under exposed.  In the final row I have changed the aperture whilst keeping ISO and shutter speed constant from f/4 to f/5.6 to f/8; again this results in a change in exposure from 1 stop over, to correct to 1 stop under. I now hear you asking 2 questions "Why does the f-number not double or halve and what the hell are stops?!"

STOP!

Stops are the terms photographers use to describe the changing amount of light coming into a camera and the resultant exposure.  A change of 1 stop corresponds to a change in the light coming into the camera by a factor of 2.  Adding a stop means that there is twice as much light coming in, subtracting a stop means that there is half as much light coming in.   As you can see in my example above the image brightness for each change in exposure settings is exactly the same regardless of which method I chose to achieve it.  I promise I did take 7 separate images, the one for the middle which had a setting of ISO400, f/5.6 and 1/200 and the six outliers!

F-numbers are confusing

F-numbers don't change in easy steps because the amount of the light captured by a sensor is proportional to the area of the aperture that allows the light through.  This means that to halve the amount of light coming in we have to choose an f-number which is sqrt(2) or 1.4 times larger than the previous aperture (5.6*1.4 = 8 for the above example) and conversely to double the light coming in we have to have an f-number 1.4 times smaller than the previous aperture (5.6/1.4 = 4 for the above example).

To make things simpler you could always try to memorise the whole f-number steps:
1, 1.4, 2, 2.8, 4, 5.6, 8, 11, 16, 22, ...
But do you have to?

I think the answer to that is no.  And here's why ... your camera should tell you!

EV phone home

Most cameras, including compacts, will tell you an EV or Exposure Value normally ranging from -3 to +3 in 1/3 steps.  What does this mean?  Simple an exposure value of 0 is what the camera thinks is the correct exposure; bear in mind that may not be the same as what you think is the correct exposure!  Each whole number increment (or decrement) is then equivalent to one stop of exposure!  So you can (in manual mode) pick an f-number and ISO and then change the shutter speed to give a different exposure at whole stop or 1/3 stop steps.

What you can also do with most cameras, including compacts, is set an offset to the exposure by forcing it to have a non-zero EV.  Look for a button that says EV+/- or EV or a setting which has a scale from -3-0-+3 and have a play.  What this allows you to do is set say an f-number in aperture mode and force the camera to then under or over expose the image.  This ability can be very powerful especially when talking about the digital dark room (see later tutorials).

The trade off

I'm not going to tell you what is right and wrong for exposure as it is personal taste, with the exception of complete under or over exposure!  When we were getting married my wife and I saw a photographer who liked to make her photos look ethereal by over exposing them, something I hate, but others like.  What I will tell you however is choose your method of changing exposure carefully.

If you think back to the first tutorial changing the f-number changes how much of your photo is in focus; I took the pictures below with the same EV value.  To do this I changed both the aperture and shutter speed.  On the left you can see that with a large aperture and a fast shutter speed (f/4.5 1/800th) I have got the ends of the word blurred slightly as they are slightly out of focus whilst on the right with a smaller aperture and a slower shutter (f13 1/100th) speed the whole word is in focus.
Two ways of getting the same exposure.
Why am I telling you this?  Simple, if you were taking a photo of a flower you would want the flower to be in focus and the background out of focus to draw the viewers eye to your subject; to do this you would want a larger aperture and a fast shutter (which also has the side effect of removing any motion blur as the flower blows in the wind); if you were taking a photo of a car travelling at speed, like Chris Horn has on our Facebook group then you want a slower shutter speed to blur the background as you pan to follow the car but a smaller aperture to get the whole car in focus.

Keep it simple

The key to getting your photos exposed right is to balance the needs of the photo, think what am I doing, is it a dull day, what am I shooting? Once you have done that choose the balance of settings that gives you what you think is the correct exposure for the subject or to give the special effect you are trying to get, then play around with it until you are happy.  Have a look at my blog's Hiroshima post which will hopefully show how you can use exposure settings to take a powerful image; here I have an over exposed sky as I took the exposure settings I wanted from the brightly lit walls and then used -2/3 EV to force the camera to under expose the whole image meaning the shadows behind the building are deep shadow giving the impression of the a-bomb exploding in the sky.

Some final tips:

  • Turn on flashies if your camera has them.  This will highlight areas of pure white on the LCD screen to show you where the camera thinks you have over exposed.  Keep in mind the camera is stupid and cannot tell what is meant to be white from what is over exposed!
  • Shoot with a permanent EV of -1/3 or -2/3.  This means that it will be harder for you to accidentally over expose something and allows for easier recovery of exposure mistakes in post.
  • Play with exposure bracketing if your camera allows this, it fills up the memory card but allows you to see what effect adding in up to 4 different levels of exposure will look like (depends on camera model).
Most important of all get out there and experiment! Move away from auto and have fun snapping!





 


Beginner: Understanding the Numbers

So 1st tutorial!  In this tutorial I will hopefully explain three of what I consider to be the most important set of numbers in photography, get you talking and thinking like a pro and improve your photos.  The numbers I'm going to talk about form the backbone of exposing an image correctly and this tutorial is applicable to all SLR users and some compact users where your camera allows you to do more than just pointing and shooting.

So what numbers will I be talking about?

Photography is partly art and partly science with a lot of jargon thrown in.  If you have a look at my blog you will often see me throwing out a bunch of numbers when I explain how I set up a shot.  The numbers I'm going to talk about today are a bit sciencey but stick with me and by the time you've read this you will hopefully understand some of the science and be able to use the knowledge to move from point and click to more adventurous photography.

Numbers, lots of numbers!

Today I will discuss the 3 numbers on the left under the picture, they are ISO (250), f-number (7.1) and the shutter speed (1/250).

Are you sensitive?

ISO began life in film photography to describe how sensitive a film was to light.  With the advent of digital photography the meaning of the ISO number has changed a little but not greatly.  It now defines the amount of amplification applied to the electronic signal captured by the camera's sensor but still basically says how sensitive your camera is to light.

"Great" I hear you say "I just need to set this as high as possible then!".  Unfortunately not, in electronics as many things there are trade offs.  Without getting too technical the amount that you increase the amplification by affects not only your wanted signal (the picture) but also the unwanted signal (noise).  Setting your ISO high does allow you to shoot in darker conditions but it also adds unwanted noise (called shot noise).  The origin of this noise is beyond the scope of this tutorial and to explain it would require me to dig out my uni notes, suffice to say that the higher the ISO the darker conditions you can shoot in but the worse the image will look due to noise.

Shot noise at ISO2000
If you look at the image on the left you can see that there are lots of speckles covering the picture.  This is shot noise.  The photo was taken at ISO2000 on my EOS7D which will allow you to select an ISO setting from 100 to 12800.  On most DSLRs there is a button specifically for setting the ISO, on smaller compacts you may have to hunt around to find the setting but it should always be called ISO.

You can just let the camera set the value for you but beware, sometimes it may set it higher than you would like and this can ruin an image.  Sometimes, like for this shot on the left you have to set it high and accept the noise, for example I was taking a photo of Hong Kong's light show and so needed as fast a shutter speed as possible to not end up with a light painting effect.

So what ISO should you use?  That's a tricky question and unfortunately as with many things in photography something that you have to work out for your self.  On a sunny day you generally want to shoot at ISO100, the most sensitive setting, for less bright conditions you need a higher ISO.  One good thing to do is to take a series of photos at slowly increasing ISOs and note when your image begins to get unacceptably grainy, for my camera I think this happens at about ISO800 and so I try not to go higher than this unless I have to.

Each doubling of the number then doubles the sensitivity to the light coming into your camera, or, get ready for some jargon, changes the exposure by one stop, more on this later!

f-numbers is not a swear word!

Next up the f-number.  In our camera lenses there are a set of plates that interlock together which open to allow light into the camera, these are called the aperture blades and they create a roughly circular opening.  The f-number is the ratio of the focal length of the lens to the diameter of this opening, in other words an f-number of f/2 means the lens focal length is twice as long as the aperture diameter, e.g. for a 10mm lens the aperture would be 5mm across.  With me so far?

That's maybe a bit technical so in basic terms the smaller the f-number the more light gets into the camera.  Great, so a small number is good right?

Not necessarily; again there is a trade off.  A small number means that more light gets into the camera but it also means the area of the photograph that will be in focus will be small, or in photography speak there will be a shallow depth of field.




Have a look at the two photos above.  One was taken at f/1.8 and one at f/13, which is which?

The image on the left has a small depth of field, this means that only the centre of the image around the word 'of' is in focus.  On the right pretty much all of the image is in focus because it was taken at f/13, it has a high f-number and a large depth of field as opposed to the one on the left which was taken at f/1.8, a small f-number and shallow depth of field.

So simply put if you want everything in focus then choose a large f-number, if you only want a small part in focus choose a small f-number.

BUT a larger f-number means a smaller hole for light to get in through and that means you either need a higher ISO or a slower shutter speed.  Ever get the feeling photography can be bit complicated?!

How do you use it?  On SLRs look for the dial position marked Av or A and then you should be able to choose your f-number by your control wheels, this mode allows you to change the f-number and have the camera set the shutter speed.  For more advanced shooting use the Manual or M setting where you as the photographer choose both shutter speed and aperture.  On compacts look for a setting which allows you to change the f-number which may be shown by Av, A of f/.

One other handy thing is the aperture preview function of some digital SLRs which allows you to see the result of changing the aperture, on mine it's on the lower left hand side of the lens mount (I use a Canon).

Are you fast enough?

This brings me onto the third and final important number, the shutter speed.  We know we can control how sensitive the camera is to light and we know of one other way to control how light gets into the camera but there is a third method to control exposure: the shutter speed.

Now for some more jargon which can confuse beginners.  The speed of a lens is not the same as shutter speed!  So a 'fast' lens is one which can open to a large aperture, it does not relate to the shutter speed, but, they are linked!  A fast lens is so called because due to them having a large aperture you can use a correspondingly fast shutter speed.  Confused?  Don't be it's jargon and not hugely important unless you want to sound like a pro!

So what is the shutter speed?  Inside the camera is essentially a set of curtains.  This is the shutter.  The shutter speed shows how long these curtains will be open for.  Some digital cameras now do not have mechanical shutters but turn on and off the output of the sensor to give the same effect.  Note also that in SLRs the mirror also has to move up and out of the way of the film or sensor but this is not the same as the shutter opening, for example to reduce vibrations for low light or long opening times the mirror can often be moved out of the way before you open the shutter.

Again the basic rule is simple, the longer the shutter is open the more light gets into the camera.  But it gets a little more complex than that.  Because a camera is catching the light reflected off an object if that object moves during the time the shutter is open the camera will record that movement and give a blurred image.  This can be great for some creative shots, for example with light painting but it can also ruin images, especially if you're trying to capture something moving like a bird.

Motion blur
The image on the left was taken with a shutter speed of 1/80.  This is very slow for photographing something like a butterfly but I was trying to get a blur effect like this.

What the number really means is that light is allowed into the camera for 1/80th of a second.  Sounds pretty fast right?  Wrong, my camera will allow me to shoot at 1/8000ths of a second!

To keep things simple a fast shutter speed freezes motion a slow shutter speed blurs motion.  So to get individual rain drops in a storm use a fast shutter, to make water pouring over a waterfall look milky use a slow shutter speed.

When using a slow shutter speed make sure you use a solid base for your camera, below about 1/60th of second most people cannot get decent shots by hand holding.  When using really slow speeds use  a remote control or timer and if possible lock up the mirror.

The wikipedia article on shutter speeds has a handy guide to what to use for different scenarios so I won't repeat it here, but most importantly have a play for yourself and see what you can do!

The shutter speed is controlled using the Tv or T setting on an SLR to allow you to set the shutter speed and have the camera choose what it thinks is the correct aperture; by using the Manual or M mode you can change both shutter speed and aperture; finally the Bulb or B mode allows you to have the shutter open for as long as you keep the shutter release button pressed.  On compacts you may have to dig around in the menus to find the controls for this.

Feeling exposed?

The three setting discussed above act a bit like the fire triangle for exposure of photos.  Changing one side results in a change to the exposure unless the other two sides are adjusted to compensate:

  • The ISO changes how sensitive the camera is to the light coming in.
  • The f-number says how much light comes in through the lens to strike the sensor.
  • The shutter speed says how long that light will be shining onto the sensor.

But remember there are trade-offs:

  • A high ISO means your picture will be more grainy but you can shoot in low light.
  • A low f-number means not as much of your picture will be in focus but more light gets into the camera.
  • A slow shutter speed means any motion will cause blurring (including hand shake, subject motion and camera motion e.g. mirror moving) but again more light gets into the camera.

My next article will discus stops and exposure a little more but for now get out there, take your camera off auto and have a play!



Welcome

Hi all and welcome to the APCA Photography Group blog.  This blog has been set up to share knowledge between the group.  If you feel you have something to contribute in the form of a tutorial or how-to article get in touch with one of the authors and we'll work out the best way to do it.

If there's anything in particular you'd like to see a tutorial or how-to article on shout up on the Facebook group or leave a comment on here and we'll see about writing an article for you.

Most importantly this blog is about furthering everyone's knowledge to that end please comment and critique people's photos and methods, but don't be too harsh, we don't want this to become a slagging match, keep the comments and critique constructive; if you like a photo say why, if you dislike a photo say what you would do differently, but most of all be polite and understand people are entitled to their own points of view!

As a further note inappropriate posts or photos will be removed and if necessary reported, you have been warned :).